I believe you are very familiar with cable bridge, and we can not lack this kind of cable bridge products in our daily life, and now there are a lot of cable bridge manufacturers on the market. What should we pay attention to when choosing ladder cable bridge? Next we Shandong Cable Bridge Factory will introduce to you one by one.

來說在選購梯式電纜橋架的過程當中如果產品要在具有腐蝕性的環境當中所使用，應該選用具有耐腐蝕的剛性材料制造，其防腐蝕處理也應該滿足于工程環境和耐久性的要求。

First of all, in the process of purchasing elevator cable bridge, if the product is to be used in corrosive environment, it should be made of rigid material with corrosion resistance, and its anti-corrosion treatment should also meet the requirements of engineering environment and durability.

而且梯式電纜橋架也需要具有相應的防火要求，當然在其工程防火要求較高的場所內，不能采用鋁合金電纜橋架。而且電纜橋架的寬度和高度也應該選擇填充率的要求，當然共填充率也需要符合梯式電纜橋架要求。

And the ladder cable bridge also needs to have the corresponding fire protection requirements. Of course, in the places where the fire protection requirements are high, the aluminum alloy cable bridge can not be used. And the width and height of the cable bridge should also choose the filling rate, of course, the total filling rate also needs to meet the requirements of the national ladder cable bridge.

當然在選擇梯式電纜橋架的荷載等級時，電纜橋架的工作均布荷載不能大于所選電纜橋架荷載等級的額定均布荷載，如果電纜橋架的支吊架的實際距離不等于2m時，則工作均布荷載應該滿足其要求。

Of course, when choosing the load grade of the ladder cable bridge, the working uniform load of the cable bridge should not be greater than the rated uniform load of the load grade of the selected cable bridge. If the actual distance of the suspension of the cable bridge is not equal to 2 m, the working uniform load should meet its requirements.

感謝您的閱讀與觀看，本文的精彩內容來自：山東電纜橋架，我們會有更多的精彩內容繼續為您呈現，詳情請點擊：http://szrdhz.com

Thank you for your reading and watching. The wonderful content of this article comes from: Shandong Cable Bridge, we will continue to show you more wonderful content. For more details, please click: http://szrdhz.com.